The Ti9ZrWSi alloy utilized in this paper, which can withstand 750℃ for a short time, is a new near-alpha, high-temperature, titanium alloy. The high-temperature properties of this alloy were investigated, and the ultimate tensile strength value achieved was 647.5MPa and the ductility was 38.2% at 750℃ and a strain rate of 5x10-3s-1. The strengthening mechanism of this alloy at 750℃was studied
The Gleeble-3800 thermal simulation machine was used to perform hot compression experiments on a new...
Ti555211 titanium alloy is subjected to plastic deformation in the dual-phase (α + β phase) zone and...
The investigation of the high temperature deformation behavior of Ti-6Al-4V alloy and the prediction...
The Ti9ZrWSi alloy utilized in this paper, which can withstand 750℃ for a short time, is a new near-...
The isothermal compression experiment of as-rolled Ti55 alloy was carried out on a Gleeble-3800 ther...
TiH2-basd powder metallurgy (PM) is one of the effective ways to prepared high temperature titanium ...
All data contained in the article titled "Characterization of hot deformation and microstructure evo...
Hot-deep drawing is an innovative processing technology to produce complex shaped sheet metal compon...
Hot compression deformation behavior of Ti-6Al-2Zr-3Ni alloy was investigated through thermal simula...
TC31 is a new type of α+β dual phase high temperature titanium alloy, which has a high specific stre...
Titanium is recognized for its strategic importance as a unique lightweight, high strength alloyed s...
In the present work, the elevated-temperature deformation characteristics and microstructural evolut...
TiHy 600 alloy is a near alpha titanium alloy, widely used for gas turbine engine applications such ...
Based on the modified Hopkinson torsion bar, a high-temperature dynamic shear test method was propos...
The hot deformation behavior and microstructural evolution of Ti-44Al-5V-1Cr alloy were investigated...
The Gleeble-3800 thermal simulation machine was used to perform hot compression experiments on a new...
Ti555211 titanium alloy is subjected to plastic deformation in the dual-phase (α + β phase) zone and...
The investigation of the high temperature deformation behavior of Ti-6Al-4V alloy and the prediction...
The Ti9ZrWSi alloy utilized in this paper, which can withstand 750℃ for a short time, is a new near-...
The isothermal compression experiment of as-rolled Ti55 alloy was carried out on a Gleeble-3800 ther...
TiH2-basd powder metallurgy (PM) is one of the effective ways to prepared high temperature titanium ...
All data contained in the article titled "Characterization of hot deformation and microstructure evo...
Hot-deep drawing is an innovative processing technology to produce complex shaped sheet metal compon...
Hot compression deformation behavior of Ti-6Al-2Zr-3Ni alloy was investigated through thermal simula...
TC31 is a new type of α+β dual phase high temperature titanium alloy, which has a high specific stre...
Titanium is recognized for its strategic importance as a unique lightweight, high strength alloyed s...
In the present work, the elevated-temperature deformation characteristics and microstructural evolut...
TiHy 600 alloy is a near alpha titanium alloy, widely used for gas turbine engine applications such ...
Based on the modified Hopkinson torsion bar, a high-temperature dynamic shear test method was propos...
The hot deformation behavior and microstructural evolution of Ti-44Al-5V-1Cr alloy were investigated...
The Gleeble-3800 thermal simulation machine was used to perform hot compression experiments on a new...
Ti555211 titanium alloy is subjected to plastic deformation in the dual-phase (α + β phase) zone and...
The investigation of the high temperature deformation behavior of Ti-6Al-4V alloy and the prediction...